http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/RSS.ashxHUBER+SUHNER Fiber optics PagesThu, 05 May 2011 09:31:51 +0200http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=1http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=1Passive Components edition 2011 Fiber Optic2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=2http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=2reliably connected to your network2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=3http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=3Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems for electrical and optical connectivity. Our customers in Communications, Industrial and Transportation markets appreciate that we are specialists with detailed knowledge of practical applications. We offer technical expertise in radio frequency technology, fiber optics and lowfrequency under one roof, thus providing a unique basis for continual innovation focused on the needs of our customers all over the world. HUBER+SUHNER offers a wide asssortment of passive optical network components, optimized for applications in data centers and Fiber To The Home (FTTH). Due to the rapidly growing demands on the passive optical networks (PON) HUBER+SUHNER develops innovative and customized products and solutions in accordance to the current international standards. Our passive optical network components comply with highest optical and mechanical specifications.2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=4http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=42011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=5http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=5Content Introduction and terminology 6 Broadband splitter (PLC) singlemode 8 Coupler (FBT) singlemode 18 Couplers (FBT) multimode 24 Multiplexers (WWDM) singlemode 26 Filter (FWDM) singlemode 28 Attenuators plug type 30 Excellence in Connectivity Solutions2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=6http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=6Introduction Terminologies of passive network components Terms Attenuation Attenuator Bidirectional Broadband Device Center Wavelength Coupler Decibel (dB) Demultiplexer Directivity Dual Window Excess Loss Fused Biconical Tapering (FBT) Insertion Loss (IL) Isolation Multiplexer Operating Wavelength Polarisation Dependent Loss (PDL) Planar Lightwave Circuit (PLC) Return Loss (RL) Single Window Splitter Splitting Ratio Uniformity Wavelength Division Multiplexing (WDM) Description Reduction of the signal magnitude, or loss, caused by absorption and scattering. Normally expressed in decibels (dB) A passive device for reducing the amplitude of a signal without appreciably distorting the waveform A device, operating in both directions Optical broadband devices, covering a wide range of wavelengths The nominal operating wavelength of an optical device A bidirectional device with three or more fiber ends, combining the signals of two or more input ports into one output port. Also referred as splitter. A logarithmic unit of measurement for calculating the attenuation of an optical device or an optical system. A change of -3dB equates to the halving of the optical power A device that separates two or more multiplexed signals into its original single signals; the inverse of a multiplexer The amount of undesired optical signals observed at a given input port of a device. Also referred as near-end crosstalk (NEXT) A passive optical component that is optimised to operate a two different center wavelengths. For example at 1310 nm and 1550 nm Attenuation, or loss, of the optical component itself, not included any other attenuation effects of the device A manufacturing process for passive optical network components. It consist of twisting two bare fibers exactly to each other, stretching and then fusing the fibers together; “tapering” A sum of excess loss, splitting loss and loss caused by other optical effects The amount of undesired optical signals observed at a given output port of a device. Also referred as far-end crosstalk (FEXT) A device that combines two or more signals into a single output; the inverse of a demultiplexer. Multiplexer are usually operating bidirectional The wavelength, or wavelength range, on that a passive optical component is optimised for operating Attenuation caused by the state of polarisation (SOP). This optical effect results in a deviation between the maximum and minimum of loss on an optical device A manufacturing process for optical passive network components. It consist of a waveguide array that is applied to a silica chip by using a photolithographic masking process The ratio of optical power reflected back along the path of transmission, from either the coupling region, a connector or a terminated fiber. Normally expressed in decibels (dB) A passive optical component that is optimised to operate at a single specified center wavelengths. For example at 1310 nm or 1550 nm A bidirectional device with three or more fiber ends, divides the signal of one input port into two ore more output ports. Also referred as coupler The percentage of optical power transferred to an output port of an optical device, with respect to the total power on all output ports of the device The maximum deviation of insertion loss between the different ports on a device within the operating wavelength Transmitting various signals at different wavelengths through the same fiber 6 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=7http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=7Introduction Overview of optical transmission bands Band O – Band E – Band S – Band C – Band L – Band U – Band Wavelength range 1260 nm – 1360 nm 1360 nm – 1460 nm 1460 nm – 1530 nm 1530 nm – 1565 nm 1565 nm – 1625 nm 1625 nm – 1675 nm Description Original band Extended band Short wavelength band Conventional band Long wavelength band Ultra long wavelength band Conversion of attenuation to transmission ratio and attenuation ratio Attenuation (dB) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 Transmition ratio (%) ∼ 79.40 ∼ 63.10 ∼ 50.10 ∼ 39.80 ∼ 31.60 ∼ 25.10 ∼ 19.90 ∼ 15.80 ∼ 12.60 ∼ 10.00 ∼ 7.90 ∼ 6.30 ∼ 5.00 ∼ 4.00 ∼ 3.20 ∼ 2.50 ∼ 2.00 ∼ 1.60 ∼ 1.30 ∼ 1.00 Attenuation ratio (%) ∼ 20.60 ∼ 36.90 ∼ 49.90 ∼ 60.20 ∼ 68.40 ∼ 74.90 ∼ 80.10 ∼ 84.20 ∼ 87.40 ∼ 90.00 ∼ 92.10 ∼ 93.70 ∼ 95.00 ∼ 96.00 ∼ 96.80 ∼ 97.50 ∼ 98.00 ∼ 98.40 ∼ 98.70 ∼ 99.00 HUBER+SUHNER FIBER OPTICS 72011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=8http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=81 x n / 2 x n Broadband PLC Splitter – small Case with Ribbon Fiber Singlemode Features • • • • • PLC splitter for all wavelength bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications 1 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 1x2 ≤ 4.0 ≤ 0.6 ≤ 0.3 ≤ 3.8 ≤ 0.5 ≤ 0.2 1x4 ≤ 7.3 ≤ 0.6 ≤ 0.3 ≤ 7.0 ≤ 0.5 ≤ 0.2 1x8 ≤ 10.5 ≤ 0.8 ≤ 0.3 ≤ 10.2 ≤ 0.8 ≤ 0.2 ≥ 55 ≥ 55 1 x 16 ≤ 13.8 ≤ 1.2 ≤ 0.3 ≤ 13.5 ≤ 1.2 ≤ 0.2 1 x 32 ≤ 17.0 ≤ 1.5 ≤ 0.3 ≤ 16.8 ≤ 1.2 ≤ 0.2 1 x 64 ≤ 20.6 ≤ 1.8 ≤ 0.3 ≤ 20.3 ≤ 1.8 ≤ 0.3 1260 – 1650 –40 to +85 40 x 4 x 4 47 x 7 x 4 58 x 12 x 4 Generic specifications 2 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 2x4 ≤ 7.5 ≤ 1.2 ≤ 0.3 ≤ 7.3 ≤ 1.2 ≤ 0.25 2x8 1260 – 1650 ≤ 10.8 ≤ 1.2 ≤ 0.3 ≤ 10.5 ≤ 1.2 ≤ 0.25 ≥ 55 ≥ 55 –40 to +85 55 x 7 x 4 2 x 16 ≤ 14.3 ≤ 1.8 ≤ 0.3 ≤ 14.0 ≤ 1.8 ≤ 0.3 2 x 32 ≤ 17.8 ≤ 1.8 ≤ 0.3 ≤ 17.5 ≤ 1.8 ≤ 0.3 60 x 7 x 4 Dimensional drawing 250 μm or 0.9 mm input fiber and 4 ch / 8 ch* ribbon output fiber L Note: *2 and 4 output ports with 1x 4 ch ribbon fiber, 8 output ports with 1 x 8 ch ribbon fiber, 16 output ports with 2 x 8 ch ribbon fiber, 32 output ports with 4 x 8 ch ribbon fiber, etc. W H 8 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=9http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=91 x n / 2 x n Broadband PLC Splitter – small Case with Ribbon Fiber Singlemode Ordering code P 1032- Description splitter type P 1002 1004 1008 1016 1032 1064 PLC splitter 1x2 1x4 1x8 1 x 16 1 x 32 1 x 64 2004 2008 2016 2032 2x4 2x8 2 x 16 2 x 32 number of ports case type A A A A A A B A1 A 1 2 44 small case with ribbon fiber output 1260 nm – 1650 nm singlemode 9/125 μm - standard splitter grade singlemode 9/125 μm - premium splitter grade equal 250 μm bare fiber 0.9 mm loose tube ribbon fiber not de-ribbonised, no fan-out divider operating wavelength fiber type – splitter quality grade splitting ratio lead type on input port lead type on output port lead length on input port 10 05 06 07 08 1000** 00 0.5 m 0.6 m 0.7 m 0.8 m 09 10 … 30 0.9 m 1.0 m … 3.0 m lead length on output port see lead length list for input port ribbon length no fan-out connector type on input port no connector available if input port with 250 µm bare fiber 00/ 00 30 33 34 70 73 74 00K 00 K A N no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° no connector 80 83 85 86 90 93 LX.5 LX.5 APC LC ≤ 1.0 mm LC APC ≤ 1.0 mm LSH LSH APC connector type on output port connector quality grade on input port no connector singlemode LAN-Eco APC not available if input port with 250 µm bare fiber singlemode LAN-Eco UPC not available if input port with 250 µm bare fiber connector quality grade on output port K K no connector HUBER+SUHNER FIBER OPTICS 92011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=10http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=101 x n / 2 x n Broadband PLC Splitter – small Case with de-ribbonised Output Singlemode Features • • • • • PLC splitter for all wavelength bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications 1 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 1x2 ≤ 4.0 ≤ 0.6 ≤ 0.3 ≤ 3.8 ≤ 0.5 ≤ 0.2 1x4 ≤ 7.3 ≤ 0.6 ≤ 0.3 ≤ 7.0 ≤ 0.5 ≤ 0.2 1x8 ≤ 10.5 ≤ 0.8 ≤ 0.3 ≤ 10.2 ≤ 0.8 ≤ 0.2 ≥ 55 ≥ 55 1 x 16 ≤ 13.8 ≤ 1.2 ≤ 0.3 ≤ 13.5 ≤ 1.2 ≤ 0.2 1 x 32 ≤ 17.0 ≤ 1.5 ≤ 0.3 ≤ 16.8 ≤ 1.2 ≤ 0.2 1 x 64 ≤ 20.6 ≤ 1.8 ≤ 0.3 ≤ 20.3 ≤ 1.8 ≤ 0.3 1260 – 1650 –40 to +85 40 x 4 x 4 47 x 7 x 4 58 x 12 x 4 Generic specifications 2 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 2x4 ≤ 7.5 ≤ 1.2 ≤ 0.3 ≤ 7.3 ≤ 1.2 ≤ 0.25 2x8 1260 – 1650 ≤ 10.8 ≤ 1.2 ≤ 0.3 ≤ 10.5 ≤ 1.2 ≤ 0.25 ≥ 55 ≥ 55 –40 to +85 55 x 7 x 4 2 x 16 ≤ 14.3 ≤ 1.8 ≤ 0.3 ≤ 14.0 ≤ 1.8 ≤ 0.3 2 x 32 ≤ 17.8 ≤ 1.8 ≤ 0.3 ≤ 17.5 ≤ 1.8 ≤ 0.3 60 x 7 x 4 Dimensional drawing L 250 μm or 0.9 mm input fiber and 4 ch/8 ch* ribbon fibers, de-ribbonised to 250 μm individual output fibers Note: *2 and 4 output ports with 1 x 4 ch ribbon fiber, 8 output ports with 1 x 8 ch ribbon fiber, 16 output ports with 2 x 8 ch ribbon fiber, 32 output ports with 4 x 8 ch ribbon fiber, etc. W H 10 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=11http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=111 x n / 2 x n Broadband PLC Splitter – small Case with de-ribbonised Output Singlemode Ordering code P 1032- Description splitter type P 1002 1004 1008 1016 1032 1064 PLC splitter 1x2 1x4 1x8 1 x 16 1 x 32 1 x 64 2004 2008 2016 2032 2x4 2x8 2 x 16 2 x 32 Number of ports case type A A small case with ribbon fiber de-ribbonised individual 250 µm fibers, without fan-out divider operating wavelength A A A A B A1 A 1 2 110 1 05 06 07 08 10** 1260 nm – 1650 nm singlemode 9/125 μm - standard splitter grade singlemode 9/125 μm - premium splitter grade equal 250 μm bare fiber 0.9 mm loose tube 250 μm de-ribonised ribbon fiber 0.5 m 0.6 m 0.7 m 0.8 m 09 10 … 30 0.9 m 1.0 m … 3.0 m fiber type – splitter quality grade splitting ratio lead type on input port lead type on output port lead length on input port lead length on output port see lead length list for input port ribbon length from the splitter to the position where the ribbon fiber is de-ribbonised 10- 10 15 20 10 cm (100 mm) 15 cm (150 mm) 20 cm (200 mm) 25 … 50 25 cm (250 mm) … 50 nm (500 mm) connector type on input port no connector available if input port with 250 µm bare fiber 00/ 00 30 33 34 70 73 74 00K 00 K A N no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° no connector 80 83 85 86 90 93 LX.5 LX.5 APC LC ≤ 1.0 mm LC APC ≤ 1.0 mm LSH LSH APC connector type on output port connector quality grade on input port no connector singlemode LAN-Eco APC not available if input port with 250 µm bare fiber singlemode LAN-Eco UPC not available if input port with 250 µm bare fiber connector quality grade on output port K K no connector HUBER+SUHNER FIBER OPTICS 112011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=12http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=121 x n / 2 x n Broadband PLC Splitter – small Case with fan-out Output Singlemode Features • • • • • PLC splitter for all wavelength bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications 1 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 1x2 ≤ 4.0 ≤ 0.6 ≤ 0.3 ≤ 3.8 ≤ 0.5 ≤ 0.2 1x4 ≤ 7.3 ≤ 0.6 ≤ 0.3 ≤ 7.0 ≤ 0.5 ≤ 0.2 1x8 ≤ 10.5 ≤ 0.8 ≤ 0.3 ≤ 10.2 ≤ 0.8 ≤ 0.2 ≥ 55 ≥ 55 1 x 16 ≤ 13.8 ≤ 1.2 ≤ 0.3 ≤ 13.5 ≤ 1.2 ≤ 0.2 1 x 32 ≤ 17.0 ≤ 1.5 ≤ 0.3 ≤ 16.8 ≤ 1.2 ≤ 0.2 1 x 64 ≤ 20.6 ≤ 1.8 ≤ 0.3 ≤ 20.3 ≤ 1.8 ≤ 0.3 1260 – 1650 –40 to +85 40 x 4 x 4 47 x 7 x 4 58 x 12 x 4 Generic specifications 2 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 2x4 ≤ 7.5 ≤ 1.2 ≤ 0.3 ≤ 7.3 ≤ 1.2 ≤ 0.25 2x8 1260 – 1650 ≤ 10.8 ≤ 1.2 ≤ 0.3 ≤ 10.5 ≤ 1.2 ≤ 0.25 ≥ 55 ≥ 55 –40 to +85 55 x 7 x 4 2 x 16 ≤ 14.3 ≤ 1.8 ≤ 0.3 ≤ 14.0 ≤ 1.8 ≤ 0.3 2 x 32 ≤ 17.8 ≤ 1.8 ≤ 0.3 ≤ 17.5 ≤ 1.8 ≤ 0.3 60 x 7 x 4 Dimensional drawing 250 μm or 0.9 mm input fiber and 4 ch /8 ch* ribbon fiber output with fan-out divider(s)**, available with or without connectors L Note: *2 and 4 output ports with 1 x 4 ch ribbon fiber, 8 output ports with 1 x 8 ch ribbon fiber, 16 output ports with 2 x 8 ch ribbon fiber, 32 output ports with 4 x 8 ch ribbon fiber, etc. **one fan-out divider required per ribbon fiber output W H 12 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=13http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=131 x n / 2 x n Broadband PLC Splitter – small Case with fan-out Output Singlemode Ordering code P 1032- Description splitter type P 1002 1004 1008 1016 1032 1064 PLC splitter 1x2 1x4 1x8 1 x 16 1 x 32 1 x 64 2004 2008 2016 2032 2x4 2x8 2 x 16 2 x 32 number of ports case type A A A A A A B A2 A 1 2 65 6 small case with ribbon fiber and fan-out 1260 nm – 1650 nm singlemode 9/125 μm - standard splitter grade singlemode 9/125 μm - premium splitter grade equal 250 μm bare fiber 0.9 mm loose tube ribbon fiber with 0.9mm standard fan-out divider divider size: 35 mm x 12 mm x 7 mm operating wavelength fiber type – splitter quality grade splitting ratio lead type on input port lead type on output port ribbon fiber with 0.9mm small fan-out divider divider size: 14.5 mm x 6 mm x 3.5 mm) lead length on input port 10 05 06 07 08 10** 0.5 m 0.6 m 0.7 m 0.8 m 09 10 … 30 0.9 m 1.0 m … 3.0 m lead length on output port see lead length list for input port ribbon length from the splitter to the position of fan-out 10- 10 15 20 10 cm (100 mm) 15 cm (150 mm) 20 cm (200 mm) 25 … 50 25 cm (250 mm) … 50 nm (500 mm) connector type on input port no connector available if input port with 250 µm bare fiber 00/ 00 30 33 34 70 73 74 00K ** K A N K ** no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° 80 83 85 86 90 93 LX.5 LX.5 APC LC ≤ 1.0 mm LC APC ≤ 1.0 mm LSH LSH APC connector type on output port see connector list for input port no connector singlemode LAN-Eco APC singlemode LAN-Eco UPC see connector quality grade list for input port connector quality grade on input port connector quality grade on output port HUBER+SUHNER FIBER OPTICS 132011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=14http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=141 x n Broadband PLC Splitter – small Case with 0.9 mm buffered Fibers Singlemode Features • • • • • PLC splitter for all wavelength bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications 1 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 1x2 ≤ 4.0 ≤ 0.6 ≤ 0.3 ≤ 3.8 ≤ 0.5 ≤ 0.2 1x4 1260 – 1650 ≤ 7.3 ≤ 0.6 ≤ 0.3 ≤ 7.0 ≤ 0.5 ≤ 0.2 ≥ 55 ≥ 55 –40 to +85 55 x 7 x 4 1x8 ≤ 10.5 ≤ 0.8 ≤ 0.3 ≤ 10.2 ≤ 0.8 ≤ 0.2 Dimensional drawing L W H Small hard case version with 900 μm buffered individual fibers on input and output, with or without connectors 14 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=15http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=151 x n Broadband PLC Splitter – small Case with 0.9 mm buffered Fibers Singlemode Ordering code P 1004- Description splitter type P 1002 1004 1008 PLC splitter 1x2 1x4 1x8 small case with 0.9 mm buffered fiber 1260 nm – 1650 nm singlemode 9/125 μm - standard splitter grade singlemode 9/125 μm - premium splitter grade equal 0.9 mm buffered fiber 0.9 mm buffered fiber 0.5 m 0.6 m 0.7 m 0.8 m 09 10 … 30 0.9 m 1.0 m … 3.0 m number of ports case type B A A B A A B A2 210 A 2 2 05 06 07 08 100000/ ** 00 00 30 33 34 70 73 74 00K ** K A N K ** operating wavelength fiber type – splitter quality grade splitting ratio lead type on input port lead type on output port lead length on input port lead length on output port see lead length list for input port ribbon length no fan-out no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° 80 83 85 86 90 93 LX.5 LX.5 APC LC ≤ 1.0 mm LC APC ≤ 1.0 mm LSH LSH APC connector type on input port connector type on output port see connector type list for input port no connector singlemode LAN-Eco APC singlemode LAN-Eco UPC see connector quality grade list for input port connector quality grade on input port connector quality grade on output port HUBER+SUHNER FIBER OPTICS 152011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=16http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=161 x n / 2 x n Broadband PLC Splitter – Standard hard Case Singlemode Features • • • • • PLC splitter for all wavelength bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications 1 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 1x2 ≤ 4.0 ≤ 0.6 ≤ 0.3 ≤ 3.8 ≤ 0.5 ≤ 0.2 1x4 ≤ 7.3 ≤ 0.6 ≤ 0.3 ≤ 7.0 ≤ 0.5 ≤ 0.2 1x8 ≤ 10.5 ≤ 0.8 ≤ 0.3 ≤ 10.2 ≤ 0.8 ≤ 0.2 1 x 16 ≤ 13.8 ≤ 1.2 ≤ 0.3 ≤ 13.5 ≤ 1.2 ≤ 0.2 ≥ 55 ≥ 55 –40 to +85 1 x 32 ≤ 17.0 ≤ 1.5 ≤ 0.3 ≤ 16.8 ≤ 1.2 ≤ 0.2 1 x 64 ≤ 20.6 ≤ 1.8 ≤ 0.3 ≤ 20.3 ≤ 1.8 ≤ 0.3 1260 – 1650 100 x 80 x 10 100 x 100 x 20 Generic specifications 2 x n standard and premium grade* Parameter Operating wavelength Insertion loss standard grade Uniformity standard grade PDL standard grade Insertion loss premium grade Uniformity premium grade PDL premium grade Return loss Directivity Operating temperature Package dimension (L x W x H) * Without connector loss Unit nm dB dB dB dB dB dB dB dB °C mm 2x4 ≤ 7.5 ≤ 1.2 ≤ 0.3 ≤ 7.3 ≤ 1.2 ≤ 0.25 2x8 1260 – 1650 ≤ 10.8 ≤ 1.2 ≤ 0.3 ≤ 10.5 ≤ 1.2 ≤ 0.25 ≥ 55 ≥ 55 –40 to +85 100 x 80 x 10 2 x 16 ≤ 14.3 ≤ 1.8 ≤ 0.3 ≤ 14.0 ≤ 1.8 ≤ 0.3 2 x 32 ≤ 17.8 ≤ 1.8 ≤ 0.3 ≤ 17.5 ≤ 1.8 ≤ 0.3 Dimensional drawing L W Standard hard case version with 0.9 mm buffered fibers or 2.0 mm cables on input and output, with or without connectors. H 16 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=17http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=171 x n / 2 x n Broadband PLC Splitter – Standard hard Case Singlemode Ordering code P 1004- Description splitter type P 1002 1004 1008 1016 1032 1064 PLC splitter 1x2 1x4 1x8 1 x 16 1 x 32 1 x 64 2004 2008 2016 2032 2x4 2x8 2 x 16 2 x 32 number of ports case type D C D standard aluminium hard case with 0.9 mm loose tube or 2.0 mm cable standard plastic hard case (Material: ABS) with 0.9 mm loose tube or 2.0 mm cable operating wavelength A A A A B A3 A 2 3 32 3 10 05 06 07 08 100000/ ** 00 00 30 33 34 70 73 74 1260 nm – 1650 nm singlemode 9/125 μm - standard splitter grade singlemode 9/125 μm - premium splitter grade equal 0.9 mm loose tube 2.0 mm cable 0.9 mm loose tube 2.0 mm cable 0.5 m 0.6 m 0.7 m 0.8 m 09 10 … 30 0.9 m 1.0 m … 3.0 m fiber type – splitter quality grade splitting ratio lead type on input port lead type on output port lead length on input port lead length on output port see lead length list for input port ribbon length no fan-out no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° 80 83 85 8P 86 8Q 90 93 LX.5 LX.5 APC LC ≤ 1.0 mm LC push-pull LC APC ≤ 1.0 mm LC APC push-pull LSH LSH APC connector type on input port connector type on output port 00K ** K A N K ** see connector type list for input port connector quality grade on input port no connector singlemode LAN-Eco APC singlemode LAN-Eco UPC see connector quality grade list for input port connector quality grade on output port HUBER+SUHNER FIBER OPTICS 172011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=18http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=181 x 2 / 2 x 2 dual Band FBT Coupler Singlemode Features • • • • • Fiber based splitter for 1310 nm & 1550 nm bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications* Parameter Operating wavelength Insertion loss Uniformity PDL Return loss Directivity Operating temperature Package dimension (Ø x L or L x W x H) Input/output tail type * Without connector loss Unit nm dB dB dB dB dB °C mm - 50/50 ≤ 3.7 ≤ 1.0 ≤ 0.15 40/60 ≤ 4.7/2.7 30/70 20/80 10/90 05/95 01/99 1310 nm ± 10 & 1550 nm ± 10 ≤ 6.0/1.9 ≤ 7.9/1.2 ≤ 11.3/0.7 ≤ 18.9/0.5 ≤ 24.0/0.4 n/a ≤ 0.2 ≥ 55 ≥ 55 –40 to +85 Ø 3.0 x 54 250 μm bare fiber Ø 3.0 x 54 or 3.0 x 60 0.9 mm loose tube 85 x 17.5 x 7.5 or 90 x 14 x 8.5 0.9 mm loose tube or 2.0 mm cable ≤ 0.3 Dimensional drawings L L Ø Ø Tubular case with 250 μm bare fiber for 1 x 2 / 2 x 2 type Tubular case with 0.9 mm loose tube for 1 x 2 / 2 x 2 type L W H Plastic hard case with 0.9 mm loose tube or 2.0 mm cable for 1 x 2 / 2 x 2 type 18 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=19http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=191 x 2 / 2 x 2 dual Band FBT Coupler Singlemode Ordering code F 1002- Description splitter type F fiber based splitter number of ports 1002 1 x 2 2002 2 x 2 case type D standard plastic hard case with 0.9 mm loose tube or 2.0 mm cable E E F tubular case with 250 µm bare fiber tubular case with 0.9 mm loose tube B A A- 1 operating wavelength B 1310 nm ±10 & 1550 nm ±10 fiber type – splitter quality grade A singlemode 9/125 μm - standard splitter grade splitting ratio A 50:50 E 10:90 F 05:95 B 40:60 01:99 C 30:70 G 20:80 D lead type on input port 1 250 μm bare fiber with tubular case (code E) only 2 3 0.9 mm loose tube with tubular case (code F) or standard plastic case (code D) 2.0 mm cable with standard plastic case (code D) only 110 1000- lead type on output port see lead type list for input port ** lead length on input port 05 0.5 m 09 06 0.6 m 10 07 0.7 m … 08 0.8 m 30 lead length on output port see lead length list for input port ** ribbon length 00 no fan-out connector type on input port 00/ 00 30 33 34 70 73 74 no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° 80 83 85 8P 86 8Q 90 93 0.9 m 1.0 m … 3.0 m no connector available if input port with 250 µm bare fiber LX.5 LX.5 APC LC ≤ 1.0 mm LC push-pull LC APC ≤ 1.0 mm LC APC push-pull LSH LSH APC connector type on output port no connector available if output port with 250 µm bare fiber 00K See connector type list for input port ** connector quality grade on input port K no connector A singlemode LAN-Eco APC not available if input/output port with 250µm bare fiber N singlemode LAN-Eco UPC not available if input/output port with 250µm bare fiber K HUBER+SUHNER FIBER OPTICS connector quality grade on output port see connector quality grade list for input port ** 192011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=20http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=201 x 2 dual Band FBT Coupler (H+S Standard Items) Singlemode HUBER+SUHNER standard items can be used for various applications and in different configurations. The extended 0.9 mm loose tube input and output length of 2.0 m each side covers a wide range of different required tail lengths. This enables to dispose these H+S standard types for many different applications, by cutting the tails to the appropriate length and terminate the ends with connector types as needed. The 0.9 mm loose tube can be terminated with all kind of H+S singlemode connectors or be used for direct splicing in a tray, cassette or 19 inch box. Features • • • • • Fiber based splitter for 1310 nm & 1550 nm bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring 20 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=21http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=211 x 2 dual Band FBT Coupler (H+S Standard Items) Singlemode Generic specifications* Parameter Item no. Operating wavelength Insertion loss Uniformity PDL Return loss Directivity Operating temperature Package dimension (Ø x L) Input/output tail lenght Input/output tail type Input/output connector type * Without connector loss Unit nm dB dB dB dB dB °C mm mm - 50/50 84075633 40/60 84075632 30/70 84075631 20/80 84075630 10/90 84075638 05/95 84075629 01/99 84075628 1310 nm ±10 & 1550 nm ±10 ≤ 3.7 ≤ 0.1 ≤ 0.15 ≤ 0.2 ≥ 55 ≥ 55 –40 to +85 Ø 3.0 x 54 or Ø 3.0 x 60 ≥ 2000 ≥ 2000 ≥ 2000 ≥ 2000 no connectors ≥ 2000 ≥ 2000 ≥ 2000 0.9 mm loose tube ≤ 4.7/2.7 ≤ 6.0/1.9 ≤ 7.9/1.2 ≤ 11.3/0.7 ≤ 18.9/0.5 ≤ 24.0/0.4 n/a ≤ 0.3 Dimensional drawings ≥ 2.0 m L ≥ 2.0 m Ø Tubular case with 0.9 mm loose tube for 1 x 2 types HUBER+SUHNER FIBER OPTICS 212011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=22http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=221 x 2 / 2 x 2 all Band FBT Coupler Singlemode Features • • • • • Fiber based splitter for all wavelength bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications* Parameter Operating wavelength Insertion loss Uniformity ** PDL Return loss Directivity Operating temperature Package dimension (Ø x L or L x W x H) Input/output tail type * Without connector loss **Uniformity ≤ 0.6 dB at center wavelengths 1310 nm, 1490 nm and 1550 nm, ≤1.6 dB over operating wavelength 1260 nm to 1620 nm Unit nm dB dB dB dB dB °C mm - 50/50 ≤ 4.0 ≤ 0.6/1.6 40/60 ≤ 5.3/3.3 30/70 ≤ 6.7/2.5 20/80 1260 to 1620 10/90 05/95 01/99 ≤ 8.8/1.8 ≤ 12.2/1.2 ≤ 15.5/0.9 ≤ 23.5/0.75 n/a ≤ 0.2 ≥ 55 ≥ 55 –40 to +85 Ø 3.0 x 54 250 μm bare fiber Ø 3.0 x 54 0.9 mm loose tube 90 x 14 x 8.5 0.9 mm loose tube or 2.0 mm cable Dimensional drawings L L Ø Ø Tubular case with 250 μm bare fiber for 1 x 2 / 2 x 2 type Tubular case with 0.9 mm loose tube for 1 x 2 / 2 x 2 type L W H Plastic hard case with 0.9 mm loose tube or 2.0 mm cable for 1 x 2 / 2 x 2 type 22 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=23http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=231 x 2 / 2 x 2 all Band FBT Coupler Singlemode Ordering code F 1002- Description splitter type F fiber based splitter number of ports 1002 1 x 2 2002 2 x 2 case type D standard plastic hard case with 0.9 mm loose tube or 2.0 mm cable E E F tubular case with 250 µm bare fiber tubular case with 0.9 mm loose tube A A A- 1 operating wavelength A 1260 nm – 1620 nm fiber type – splitter quality grade A singlemode 9/125 μm - standard splitter grade splitting ratio A 50:50 E 10:90 F 05:95 B 40:60 01:99 C 30:70 G 20:80 D lead type on input port 1 250 μm bare fiber with tubular case (code E) only 2 3 0.9 mm loose tube with tubular case (code F) or standard plastic case (code D) 2.0 mm cable with standard plastic case (code D) only 110 1000- lead type on output port see lead type list for input port ** lead length on input port 05 0.5 m 09 06 0.6 m 10 07 0.7 m … 08 0.8 m 30 lead length on output port see lead length list for input port ** ribbon length 00 no fan-out connector type on input port 00/ 00 30 33 34 70 73 74 no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° 80 83 85 8P 86 8Q 90 93 0.9 m 1.0 m … 3.0 m no connector available if input port with 250 µm bare fiber LX.5 LX.5 APC LC ≤ 1.0mm LC push-pull LC APC ≤ 1.0 mm LC APC push-pull LSH LSH APC connector type on output port no connector available if output port with 250 µm bare fiber 00K see connector type list for input port ** connector quality grade on input port K no connector A singlemode LAN-Eco APC not available if input/output port with 250 µm bare fiber N singlemode LAN-Eco UPC not available if input/output port with 250 µm bare fiber K HUBER+SUHNER FIBER OPTICS connector quality grade on output port see connector quality grade list for input port ** 232011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=24http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=241 x 2 / 2 x 2 single Band and dual Band FBT Coupler Multimode Features • • • • • Fiber based splitter for 850 nm and/or 1300 nm bands Low excess loss Low polarisation dependent loss (PDL) Excellent mechanical and environmental performance Telcordia GR-1209 / GR-1221 Applications • Telecommunication networks • CATV networks data communication • Network monitoring Generic specifications* Parameter Operating wavelength Insertion loss Uniformity PDL Return loss Directivity Operating temperature Package dimension (Ø x L or L x W x H) Input/output tail type Fiber type * Without connector loss Unit nm dB dB dB dB dB °C mm - 50/50 ≤ 4.0 ≤ 0.8 40/60 ≤ 5.0/3.0 30/70 ≤ 6.3/2.4 20/80 ≤ 8.1/1.7 n/a n/a ≥ 40 ≥ 40 –40 to +85 10/90 05/95 01/99 850 nm ± 40 or 1300 nm ± 40 / 850 nm & 1300 nm ± 40 ≤ 11.6/1.2 ≤ 15.0/1.0 ≤ 22.8/0.8 Ø 3.0 x 54 or Ø 3.0 x 60 250 μm bare fiber Ø 3.0 x 54 or Ø 3.0 x 60 0.9 mm loose tube 50/125 μm or 62.5/125 μm 90 x 14 x 8.5 0.9 mm loose tube or 2.0 mm cable Dimensional drawings L L Ø Ø Tubular case with 250 μm bare fiber for 1 x 2 / 2 x 2 type Tubular case with 0.9 mm loose tube for 1 x 2 / 2 x 2 type L W H Plastic hard case with 0.9 mm loose tube or 2.0 mm cable for 1 x 2 / 2 x 2 type 24 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=25http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=251 x 2 / 2 x 2 single Band and dual Band FBT Coupler Multimode Ordering code F 1002- Description splitter type F fiber based splitter number of ports 1002 1 x 2 2002 2 x 2 case type D standard plastic hard case with 0.9 mm loose tube or 2.0 mm cable E E F tubular case with 250 µm bare fiber tubular case with 0.9 mm loose tube D I A- 1 operating wavelength D 850 nm ± 40, LED optimized F 1300 nm ± 40, LED optimized H 850 nm ± 40 & 1300 nm ±40, LED optimized fiber type – splitter quality grade I multimode 50/125 μm fiber - standard grade splitter P multimode 62.5/125 μm fiber - standard grade splitter splitting ratio 50:50 E 10:90 A B 40:60 F 05:95 G 01:99 C 30:70 D 20:80 lead type on input port 1 250 μm bare fiber with tubular case (code E) only 2 3 0.9 mm loose tube with tubular case (code F) or standard plastic case (code D) 2.0 mm cable with standard plastic case (code D) only 110 1000- lead type on output port see lead type list for input port ** lead length on input port 05 0.5 m 09 06 0.6 m 10 07 0.7 m … 08 0.8 m 30 lead length on output port see lead length list for input port ** ribbon length 00 no fan-out connector type on input port 00/ 00 no connector 20 ST-HQ 22 ST-Security 24 ST-LEAN 30 FC connector type on output port 00K 70 80 85 8P 90 0.9 m 1.0 m … 3.0 m no connector available if input port with 250 µm bare fiber SC LX.5 LC ≤ 1.0 mm LC push-pull LSH no connector available if output port with 250 µm bare fiber see connector type list for input port ** connector quality grade on input port K no connector M multimode not available if input/output port with 250 µm bare fiber K connector quality grade on output port see connector quality grade list for input port ** HUBER+SUHNER FIBER OPTICS 252011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=26http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=261310 / 1550 nm WWDM Singlemode Features • Low insertion loss • High channel isolation • Excellent mechanical and environmental performance Applications • Telecommunication networks • CATV networks data communication • FTTH applications Generic specifications* Parameter Operating wavelength Insertion loss Isolation PDL Return loss Directivity Operating temperature Package dimension (Ø x L or L x W x H) Input/output tail type * Without connector loss Unit nm dB dB dB dB dB °C mm - Standard Grade 1310 / 1550 ± 15 ≤ 0.6 ≥ 16dB ≤ 0.15 ≥ 55dB ≥ 60dB –40 to +85 Ø 3.0 x 54 250 μm bare fiber Ø 3.0 x 54 or Ø 3.0 x 60 0.9 mm loose tube Premium Grade ≤ 0.4 ≥ 17dB ≤ 0.1 85 x 17.5 x 7.5 or 90 x 14 x 8.5 0.9 mm loose tube or 2.0 mm cable Dimensional drawings L L Ø Ø Tubular case with 250 μm bare fiber Tubular case with 0.9 mm loose tube L W H Plastic hard case with 0.9 mm loose tube or 2.0 mm cable 26 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=27http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=271310 / 1550 nm WWDM Singlemode Ordering code W A- Description WDM type W A B Wide Wavelength Division Multiplexer (WWDM) singlemode 9/125 μm - standard splitter grade singlemode 9/125 μm - premium splitter grade Standard isolation Standard plastic hard case with 0.9 mm loose tube or 2.0 mm cable fiber type – splitter quality grade isolation type S F S D E F case type tubular case with 250 µm bare fiber tubular case with 0.9 mm loose tube wavelength 1 31/ 552 31 55 1 2 3 1310 nm 1550 nm 250 μm bare fiber with tubular case (code E) only wavelength 2 lead type on input port 0.9 mm loose tube with tubular case (code F) or standard plastic case (code D) 2.0 mm cable with standard plastic case (code D) only lead type on output port 210 4 05 06 07 08 10** see lead type list for input port lead length on input port 0.5 m 0.6 m 0.7 m 0.8 m 09 10 … 30 0.9 m 1.0 m … 3.0 m lead length on output port see lead length list for input port connector type on input port no connector available if input port with 250 µm bare fiber 00/ 00 30 33 34 70 73 74 no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° 80 83 85 86 90 93 LX.5 LX.5 APC LC ≤ 1.0 mm LC APC ≤ 1.0 mm LSH LSH APC connector type on output port no connector available if output port with 250 µm bare fiber 00K ** K A N see connector type list for input port connector quality grade on input port no connector singlemode LAN-Eco APC not available if input port with 250 µm bare fiber singlemode LAN-Eco UPC not available if input port with 250 µm bare fiber connector quality grade on output port K HUBER+SUHNER FIBER OPTICS ** see connector type list for input port 272011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=28http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=281310 + 1490 / 1550 nm FWDM Filter Singlemode Features • • • • Wide pass band Low insertion loss High channel isolation Excellent mechanical and environmental performance Applications • Telecommunication networks • CATV networks data communication • FTTH applications Generic specifications* Parameter Central wavelength Pass band Reflection band Pass band insertion loss Reflection band insertion loss Pass band isolation Reflection band isolation Directivity Return loss PDL Power handling (max.) Operating temperature Package dimension (Ø x L) Input/output tail type * Without connector loss Unit nm nm nm dB dB dB dB dB dB dB mW °C mm --- Value 1310, 1490, 1550 1550 ±10 1310 ± 50 / 1490 ± 10 ≤ 0.8 ≤ 0.6 ≥ 30 ≥ 14 ≥ 55 ≥ 50 ≤ 0.1 500 –40 to +85 Ø 5.5 x 34 0.9 mm loose tube H+S standard item Parameter Item no. Generic specification Connector type input/output Input/output tail length Unit ------mm 84076293 see specification above no connectors ≥ 1000 Dimensional drawing ≥ 1.0 m L ≥ 1.0 m Ø Tubular case with 0.9 mm loose tube for FWDM 28 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=29http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=291310 + 1490 / 1550 nm FWDM Filter Singlemode Ordering code F A S F Description WDM type F A S F Filter Wavelength Division Multiplexer (FWDM) singlemode 9/125 μm - standard splitter grade standard isolation tubular case with 0.9 mm loose tube fiber type – splitter quality grade isolation type case type wavelength 1 (reflection port) 31+ 49/ 552 2-10 31 49 55 2 2 05 06 07 08 1000/ ** 00 30 33 34 70 73 74 00K ** K A N K ** 1310 nm 1490 nm 1550 nm 0.9 mm loose tube 0.9 mm loose tube 0.5 m 0.6 m 0.7 m 0.8 m 09 10 … 30 0.9 m 1.0 m … 3.0 m wavelength 2 (reflection port) wavelength 3 (pass port) lead type on input port lead type on output port lead length on input port lead length on output port see lead length list for input port connector type on input port no connector FC FC APC wide key FC APC small key SC SC APC 8° SC APC 9° 80 83 85 86 90 93 LX.5 LX.5 APC LC ≤ 1.0 mm LC APC ≤ 1.0 mm LSH LSH APC connector type on output port see connector type list for input port no connector singlemode LAN-Eco APC singlemode LAN-Eco UPC see connector quality grade list for input port connector quality grade on input port connector quality grade on output port HUBER+SUHNER FIBER OPTICS 292011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=30http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=30Plug Type Attenuator SC Singlemode Features • • • • Push-pull type Maximum stability and reliability Flat spectral response SC interface according to IEC 61754-4 Applications • Passive optical networks (B-PON, G-PON, E-PON) • Multi wavelength systems balancing • Optical power receivers protection Specifications Parameter Wavelength bandwidth Attenuation Spectral tolerances Repeatability of IL Return loss Durability Operating temperature Housing material Housing colour Ferrule > 50 dB min. 1000 mating cycles –25 °C to +70 °C zinc nickel plated metallic full ceramic Value singlemode UPC Value singlemode APC Test method IEC 61300-3-4 IEC 61300-3-7 over service life > 60 dB IEC 61300-3-6 1260 nm to 1360 nm and 1460 nm to 1625 nm from 1 to 30 dB, in steps of 1 dB ± 15% on nominal attenuation value at 1– 4 dB ± 10% on nominal attenuation value at 5– 30 dB ± 0.1 dB Dimensional drawing 12.8 32.6 30 9.1 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=31http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=31Ordering Information Plug Type Attenuator SC Plug type attenuator SC/UPC Attenuation (dB) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 Item no. 84035909 23022439 84035925 23022441 23022443 23022445 84070753 23022447 84070754 23022449 84070755 84070756 84070757 84070758 23022451 84070759 84070760 84070761 84070762 23022453 84070763 84070764 84070765 84070766 84070767 84070768 84070769 84070770 84070771 84070772 Description OFA-FSC-U-010-S-01-001 OFA-FSC-U-020-S-01-001 OFA-FSC-U-030-S-01-001 OFA-FSC-U-040-S-01-001 OFA-FSC-U-050-S-01-001 OFA-FSC-U-060-S-01-001 OFA-FSC-U-070-S-01-001 OFA-FSC-U-080-S-01-001 OFA-FSC-U-090-S-01-001 OFA-FSC-U-100-S-01-001 OFA-FSC-U-110-S-01-001 OFA-FSC-U-120-S-01-001 OFA-FSC-U-130-S-01-001 OFA-FSC-U-140-S-01-001 OFA-FSC-U-150-S-01-001 OFA-FSC-U-160-S-01-001 OFA-FSC-U-170-S-01-001 OFA-FSC-U-180-S-01-001 OFA-FSC-U-190-S-01-001 OFA-FSC-U-200-S-01-001 OFA-FSC-U-210-S-01-001 OFA-FSC-U-220-S-01-001 OFA-FSC-U-230-S-01-001 OFA-FSC-U-240-S-01-001 OFA-FSC-U-250-S-01-001 OFA-FSC-U-260-S-01-001 OFA-FSC-U-270-S-01-001 OFA-FSC-U-280-S-01-001 OFA-FSC-U-290-S-01-001 OFA-FSC-U-300-S-01-001 Plug type attenuator SC/APC Attenuation (dB) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 Item no. 84070936 23022338 84070937 23022340 23022341 23022343 84070938 23022345 84070939 23022347 84070940 84070941 84070942 84070943 23022349 84070944 84070945 84070946 84070947 23022351 84070948 84070949 84070950 84070951 84070952 84070953 84070954 84070955 84070956 84070957 Description OFA-FSC-A-010-S-01-001 OFA-FSC-A-020-S-01-001 OFA-FSC-A-030-S-01-001 OFA-FSC-A-040-S-01-001 OFA-FSC-A-050-S-01-001 OFA-FSC-A-060-S-01-001 OFA-FSC-A-070-S-01-001 OFA-FSC-A-080-S-01-001 OFA-FSC-A-090-S-01-001 OFA-FSC-A-100-S-01-001 OFA-FSC-A-110-S-01-001 OFA-FSC-A-120-S-01-001 OFA-FSC-A-130-S-01-001 OFA-FSC-A-140-S-01-001 OFA-FSC-A-150-S-01-001 OFA-FSC-A-160-S-01-001 OFA-FSC-A-170-S-01-001 OFA-FSC-A-180-S-01-001 OFA-FSC-A-190-S-01-001 OFA-FSC-A-200-S-01-001 OFA-FSC-A-210-S-01-001 OFA-FSC-A-220-S-01-001 OFA-FSC-A-230-S-01-001 OFA-FSC-A-240-S-01-001 OFA-FSC-A-250-S-01-001 OFA-FSC-A-260-S-01-001 OFA-FSC-A-270-S-01-001 OFA-FSC-A-280-S-01-001 OFA-FSC-A-290-S-01-001 OFA-FSC-A-300-S-01-001 HUBER+SUHNER FIBER OPTICS 312011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=32http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=32Plug Type Attenuator FC Singlemode Features • • • • Threaded nut type Maximum stability and reliability Flat spectral response FCPC interface according to IEC 61754-13 Applications • Passive optical networks (B-PON, G-PON, E-PON) • Multi wavelength systems balancing • Optical power receivers protection Specifications Parameter Wavelength bandwidth Attenuation Spectral tolerances Repeatability of IL Return loss Durability Operating temperature Housing material Housing colour Ferrule > 50 dB min. 1000 mating cycles –25 °C to +70 °C zinc nickel plated metallic full ceramic Value singlemode UPC Value singlemode APC Test method IEC 61300-3-4 IEC 61300-3-7 over service life > 60 dB IEC 61300-3-6 1260 nm to 1360 nm and 1460 nm to 1625 nm from 1 to 30 dB, in steps of 1 dB ± 15% on nominal attenuation value at 1– 4 dB ± 10% on nominal attenuation value at 5– 30 dB ± 0.1 dB Dimensional drawing 28.6 M8 x 0.75 wrench size: male female Ø 10 2.14 mm, 0/–0.05 2.15 mm, 0/+0.05 32 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=33http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=33Ordering Information Plug Type Attenuator FC Plug type attenuator FC/UPC Attenuation (dB) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 Item no. 84035928 23022320 84035931 23022322 23022324 23022326 84071057 23022328 84071058 23022330 84071059 84071060 84071061 84071062 23022332 84071063 84071064 84071065 84071066 23022335 84071067 84071068 84071069 84071070 84071071 84071072 84071073 84071074 84071075 84071076 Description OFA-FCPC-U-010-S-01-001 OFA-FCPC-U-020-S-01-001 OFA-FCPC-U-030-S-01-001 OFA-FCPC-U-040-S-01-001 OFA-FCPC-U-050-S-01-001 OFA-FCPC-U-060-S-01-001 OFA-FCPC-U-070-S-01-001 OFA-FCPC-U-080-S-01-001 OFA-FCPC-U-090-S-01-001 OFA-FCPC-U-100-S-01-001 OFA-FCPC-U-110-S-01-001 OFA-FCPC-U-120-S-01-001 OFA-FCPC-U-130-S-01-001 OFA-FCPC-U-140-S-01-001 OFA-FCPC-U-150-S-01-001 OFA-FCPC-U-160-S-01-001 OFA-FCPC-U-170-S-01-001 OFA-FCPC-U-180-S-01-001 OFA-FCPC-U-190-S-01-001 OFA-FCPC-U-200-S-01-001 OFA-FCPC-U-210-S-01-001 OFA-FCPC-U-220-S-01-001 OFA-FCPC-U-230-S-01-001 OFA-FCPC-U-240-S-01-001 OFA-FCPC-U-250-S-01-001 OFA-FCPC-U-260-S-01-001 OFA-FCPC-U-270-S-01-001 OFA-FCPC-U-280-S-01-001 OFA-FCPC-U-290-S-01-001 OFA-FCPC-U-300-S-01-001 Plug type attenuator FC/APC Attenuation (dB) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 Item no. 84071190 23022293 84071191 23022295 23022297 23022299 84071192 23022301 84071193 23022308 84071194 84071195 84071196 84071197 23022310 84071198 84071199 84071200 84071201 23022312 84071202 84071203 84071204 84071205 84071206 84071207 84071208 84071209 84071210 84071211 Description OFA-FCPC-A-010-S-01-001 OFA-FCPC-A-020-S-01-001 OFA-FCPC-A-030-S-01-001 OFA-FCPC-A-040-S-01-001 OFA-FCPC-A-050-S-01-001 OFA-FCPC-A-060-S-01-001 OFA-FCPC-A-070-S-01-001 OFA-FCPC-A-080-S-01-001 OFA-FCPC-A-090-S-01-001 OFA-FCPC-A-100-S-01-001 OFA-FCPC-A-110-S-01-001 OFA-FCPC-A-120-S-01-001 OFA-FCPC-A-130-S-01-001 OFA-FCPC-A-140-S-01-001 OFA-FCPC-A-150-S-01-001 OFA-FCPC-A-160-S-01-001 OFA-FCPC-A-170-S-01-001 OFA-FCPC-A-180-S-01-001 OFA-FCPC-A-190-S-01-001 OFA-FCPC-A-200-S-01-001 OFA-FCPC-A-210-S-01-001 OFA-FCPC-A-220-S-01-001 OFA-FCPC-A-230-S-01-001 OFA-FCPC-A-240-S-01-001 OFA-FCPC-A-250-S-01-001 OFA-FCPC-A-260-S-01-001 OFA-FCPC-A-270-S-01-001 OFA-FCPC-A-280-S-01-001 OFA-FCPC-A-290-S-01-001 OFA-FCPC-A-300-S-01-001 HUBER+SUHNER FIBER OPTICS 332011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=34http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=34Plug Type Attenuator LC Singlemode Features • Latched push-pull type, small form factor (1.25 mm ferrule) • Maximum stability and reliability • Flat spectral response • LC interface according to IEC 61754-20 Applications • Passive optical networks (B-PON, G-PON, E-PON) • Multi wavelength systems balancing • Optical power receivers protection Specifications Parameter Wavelength bandwidth Attenuation Spectral tolerances Repeatability of IL Return loss Durability Operating temperature Housing material Housing colour blue > 50 dB min. 1000 mating cycles –25 °C to +70 °C plastic material, UL94-V0 green Value singlemode UPC Value singlemode APC Test method IEC 61300-3-4 IEC 61300-3-7 over service life > 60 dB IEC 61300-3-6 1260 nm to 1360 nm and 1460 nm to 1625 nm from 1 to 20 dB, in steps of 1 dB ± 15% on nominal attenuation value at 1– 4 dB ± 10% on nominal attenuation value at 5 – 20 dB ± 0.1 dB Dimensional drawing 6.2 30 34 10.4 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=35http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=35Ordering Information Plug Type Attenuator LC Plug type attenuator LC/UPC Attenuation (dB) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 Item no. 84025469 23029250 84025470 23029251 23029252 23029253 84025471 23029254 84025472 23029255 84025473 84025480 84025483 84025484 23029256 84025486 84025487 84025492 84025493 23029257 Description OFA-FLC-U-010-S-01-001 OFA-FLC-U-020-S-01-001 OFA-FLC-U-030-S-01-001 OFA-FLC-U-040-S-01-001 OFA-FLC-U-050-S-01-001 OFA-FLC-U-060-S-01-001 OFA-FLC-U-070-S-01-001 OFA-FLC-U-080-S-01-001 OFA-FLC-U-090-S-01-001 OFA-FLC-U-100-S-01-001 OFA-FLC-U-110-S-01-001 OFA-FLC-U-120-S-01-001 OFA-FLC-U-130-S-01-001 OFA-FLC-U-140-S-01-001 OFA-FLC-U-150-S-01-001 OFA-FLC-U-160-S-01-001 OFA-FLC-U-170-S-01-001 OFA-FLC-U-180-S-01-001 OFA-FLC-U-190-S-01-001 OFA-FLC-U-200-S-01-001 Plug type attenuator LC/APC Attenuation (dB) 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 Item no. 84073420 23029242 84073421 23029243 23029244 23029245 84073422 23029246 84073423 23029247 84073424 84073425 84073426 84073427 23029248 84073428 84073429 84073430 84073431 23029249 Description OFA-FLC-A-010-S-01-001 OFA-FLC-A-020-S-01-001 OFA-FLC-A-030-S-01-001 OFA-FLC-A-040-S-01-001 OFA-FLC-A-050-S-01-001 OFA-FLC-A-060-S-01-001 OFA-FLC-A-070-S-01-001 OFA-FLC-A-080-S-01-001 OFA-FLC-A-090-S-01-001 OFA-FLC-A-100-S-01-001 OFA-FLC-A-110-S-01-001 OFA-FLC-A-120-S-01-001 OFA-FLC-A-130-S-01-001 OFA-FLC-A-140-S-01-001 OFA-FLC-A-150-S-01-001 OFA-FLC-A-160-S-01-001 OFA-FLC-A-170-S-01-001 OFA-FLC-A-180-S-01-001 OFA-FLC-A-190-S-01-001 OFA-FLC-A-200-S-01-001 HUBER+SUHNER FIBER OPTICS 352011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=36http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=36Notes 36 HUBER+SUHNER FIBER OPTICS2011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=37http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=37Further catalogues Cables catalogue Item no. 84019826 System catalogue LiSA Item no. 84101814 Cabling systems Item no. 84104358 Connectors and Assemblies Item no. 841018082011-05-05T09:31:51+02:00http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=38http://ipaper.ipapercms.dk/HUBERSUHNER/Technologies/Fiberoptics/FOPassiveComponentsEN/?Page=38WAIVER It is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any particular purpose. The facts and figures contained herein are carefully compiled to the best of our knowledge, but they are intended for general informational purposes only. hubersuhner.com 84019859_Rev.A/04.2011 HUBER+SUHNER is certified according to ISO 9001, ISO 14001, ISO/TS 16949 and IRIS. Huber+SuHner AG Fiber Optics Division Degersheimerstrasse 14 9100 Herisau/Switzerland Tel. +41 71 353 4111 Fax +41 71 353 4647 info@hubersuhner.com Fiber Optic Passive Components2011-05-05T09:31:51+02:00