Click here to download the catalog as a PDF file. HUBER+SUHNER Communication - Page 133QUICK-FIT, H+S ECO connectors and tools QUICK-FIT coaxial connectors Technical data Electrical data Impedance Frequency range (for connector interface) VSWR PIM 1) Requirements 50 Ω N: DC . 11 GHz 7/16: DC . 7.5 GHz ≤ 1.06 (RL ≥ 30 dB); better than –155 dBc f ≤ 2.7 GHz 1) Carrier to 3rd order intermodulation product ratio with 2 x 20 W (43 dBm) carrier power, f ≤ 1.88 GHz Mechanical data Recommended coupling nut torque IEC Recommended coupling nut torque HUBER+SUHNER Coupling nut retention force Centre contact Durability (matings) Environmental data Temperature range IP rating Material data Connector part Cable entry Connector head Outer contact Centre contact Insulators Gaskets Material brass brass brass spring bronce/brass PTFE or PFA rubber Requirements N: 0.68 . 1.13 Nm / 0.49 . 0.82 ft lb. IEC 61169-16 7/16: 25 . 30 Nm / 18.05 . 21.66 ft lb. IEC 61169-4 N: 3 Nm / 2.2 ft lb. with 100 matings max. N: ≥ 450 N / 101.2 lbs. 7/16: ≥ 1000 N / 225.0 lbs. captivated ≥ 500 Requirements – 40 °C . + 85 °C / – 40 °F . + 185 °F IP 68 (acc. to IEC 60529) Plating SUCOPLATE® SUCOPLATE® SUCOPLATE® silver Some connectors may have a specification that differs from the above mentioned data. The products are designed and guaranteed to pass the above mentioned test procedures. Any additional or different requirement arising from specific applications or environmental conditions which is not covered by these test procedures is subject to request. HUBER+SUHNER Wireless infrastructure 133 |